ZCuSn10Zn2 (10-2) Cast Tin Bronze Material ZCuSn10Zn2 Tin Bronze Rod and Plate Supply
Material Name: Cast Copper Alloy (10-2 Tin Bronze, Centrifugal Continuous)
Brand: ZCuSn10Zn2
Standard: GB/T 1176-1987
Characteristics and application scope of ZCuSn10Zn2: ZCuSn10Zn2 (10-2) has good corrosion resistance, wear resistance, and machinability, good casting performance, high casting density, and good air tightness.
Chemical composition of ZCuSn10Zn2:
Copper: Other
Tin Sn: 9.0-11.0
Zinc Zn: 1.0~3.0
Lead Pb: ≤ 1.5 (not included in the total impurities)
Phosphorus P: ≤ 1.5 (excluding total impurities)
Nickel Ni: ≤ 2.0 (excluding total impurities)
Aluminum Al: ≤ 0.01 (impurities)
Iron Fe: ≤ 0.25 (impurities)
Manganese Mn: ≤ 0.2 (impurities)
Silicon Si: ≤ 0.01 (impurities)
Antimony Sb: ≤ 0.3 (impurity)
Sulfur S: ≤ 0.10 (impurities)
Note: Total impurities ≤ 1.5
● Mechanical properties of ZCuSn10Zn2:
Tensile strength σ b (MPa): ≥ 270
Yield strength σ (MPa): ≥ 140 (reference value)
Elongation rate δ 5 (%): ≥ 7
Hardness: ≥ 785HB (reference value)
ZCuSn10Zn2 Heat Treatment Specification:
Heating temperature: 1200-1250 ℃;
The pouring temperature is 1150-1200 ℃.
● ZCuSn10Zn2 casting methods: centrifugal casting, continuous casting
 
Deno Company supplies various customized copper alloys, including brass tubes, pure copper strips, red copper/purple copper plates, tin bronze, white copper, aluminum bronze, phosphor bronze, beryllium copper strips, etc. with complete specifications and quality assurance!
Copper plate thickness 1.0 1.5 2.0 3.0 4.0 5.0 8.0 10 12 15 16 20-200mm
Copper rod diameter Φ 3.0mm-315mm
Copper strip thickness 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.8 1.0 1.5 1.82.0mm
Copper wire diameter 0.1mm-4.0mm
Sincerely welcome new and old customers from all walks of life to call and inquire about and negotiate business at any time. Our high-quality products and reasonable prices will definitely meet your requirements!
Welcome new and old customers to call for consultation and negotiation. 13602392177 Business Manager: Chen Lin
1. Shipping instructions: 1. Due to the special nature of the materials, all of our company's materials are cut after the buyer pays, and they are specially customized products for the buyer. Once sold, non material issues cannot be returned or exchanged! Please understand.
2. Buyers are requested to provide a clear description of the specific specifications, tolerances, quantity, and required performance of the product before shopping. This can save both parties time and avoid disputes caused by the aforementioned reasons! If the buyer does not provide a clear description, the seller shall not be held responsible in the event of a dispute! Please understand!
Due to the daily fluctuations in steel prices and varying customer demands (our wholesale and retail prices differ), the prices displayed in the store are only for reference. We apologize for any buyers who request direct online ordering. At present, orders can only be placed through offline contact, and can be placed through contract (company three certificates or other documents)!