Ordinary brass
It is an alloy composed of copper and zinc.
When the zinc content is less than 35%, zinc can dissolve in copper to form single-phase a, which is called single-phase brass. It has good plasticity and is suitable for cold and hot pressure processing.
When the zinc content is 36%~46%, there is a single-phase and a copper zinc based β solid solution, called biphasic brass. The β phase reduces the plasticity of brass and increases its tensile strength, which is only suitable for hot pressure processing.
If the mass fraction of zinc continues to increase, the tensile strength will decrease and it will have no practical value.
The code is represented by "H+number", where H represents brass and the number represents the mass fraction of copper.
H68 represents brass with a copper content of 68% and a zinc content of 32%. For cast brass, the letter "Z" should be added before the code, such as ZH62.
Zcuzn38 represents cast brass with a zinc content of 38% and the remainder being copper.
H90 and H80 belong to single-phase brass, with a golden color, hence they are collectively referred to as gold, known as coatings, decorations, medals, etc.
H68 and H59 belong to duplex brass and are widely used in structural components of electrical appliances, such as bolts, nuts, washers, springs, etc.
In general, single-phase brass is used for cold deformation processing, and two-phase brass is used for hot deformation processing.
special brass 
The multi-element alloy composed of adding other alloying elements to ordinary brass is called brass. The commonly added elements include lead, tin, aluminum, etc., which can be referred to as lead brass, tin brass, aluminum brass, etc. The purpose of adding alloying elements. Mainly to improve tensile strength and processability.
Code: It is represented by "H+main additive element symbol (excluding zinc)+mass fraction of copper+mass fraction of main additive element+mass fraction of other elements".
For example, HPb59-1 represents lead brass with a mass fraction of 59% copper, 1% lead as the main additive element, and the remaining zinc.
The following brands are all in stock
Ordinary brass: H96 H90 H85 H80 H70 H68 H65 H63 H62 H59
Lead brass: HPb89-2 HPb66-0.5 HPb63-3 HPb63-0.1 HPb62-0.8 HPb62-3 HPb62-2 HPb61-1 HPb60-2 HPb59-3 HPb59-1 Nickel brass: HNi65-5 HNi56-3
Arsenic brass: H8H70AH68A Tin brass: HSn90-1 HSn70-1 HSn62-1 HSn60-1
Aluminum brass: HAl77-2 HAl67-2.5 HAl66-6-3-2 HAl61-4-3-1 HAl60-1-1 HAl59-3-2
Manganese brass: HMn62-3-3-0.7 HMn58-2 HMn57-3-1 HMn55-3-1
Iron brass: HFe59-1-1 HFe58-1-1 Silicon brass: HSi80-3
Copper alloy sheet thickness (mm): 0.5, 0.6, 0.7, 0.8, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 6.5, 7.0, 7.5, 8, 9, 10, 12, 14, 15, 16, 18, 22, 24, 25, 28, 30, 35, 38, 40, 45, 50, 55, 60, 65, 70, 75, 80, 88, 85, 90 to 400 thick.
Width: 20030031030560010001500
Length: 15001200200024403000
Copper coil (MM): 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.5, 2.0
Copper coil width (mm): 3003053103203604004104306001000
Copper wire, copper alloy rod (MM): diameter 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9,
1，2，3，4.5 5.0 6.0 7.0 7.8 8.0 8.2 9.0 9.5 9.8 10 10.5 11 11.5 12
12.5 12.7 13.0 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 18.3 19.8 20 20.5 21 22 23 24 24.5 25 26 27 28 29 30 31 32 32.5 33 34 35 35.5 36 37 38 40 41 42 42.5 43 45 45.8 46 48 50 581 52 53 53.5 54 54.5 55 56 58 60 62 63.5 64 64.8 70 73 75 80 86 87 90 92 95 100 105 110 115 120 130 150 155 160
Hexagonal copper rod: Diagonal side length: 4.75 5 5 6 6.35 8 12 12.7 13.5 14 16.1 17 32 42, etc
Square rod: thickness * width * length 20 * 35 * 35, 20 * 45 * 45, 25 * 35 * 35, 25 * 45 * 45, 30 * 45 * 45, 35 * 45 * 45, 30 * 45 * 45, 35 * 40 * 40, 14 * 14 * 14, etc
Small straight row, large round edge straight row, pull plate, round tube, etc. Copper tube, capillary copper tube, copper square rod, white copper flat wire, brass
Flat wire, copper flat wire, copper busbar, etc.
Special specifications can be customized
Business Hotline: 0769-83067753
Mobile phone: 13602392177
Fax: 0769-81606336
Q Online: 1652509674
Contact: Tang Zhenhua (Marketing Manager)