National service hotline135 2865 7111
151 1833 5099
151 1833 5099
Dongguan Denuo metal steel Co., LTD
Tel: 0769-83067750
Tang Zong 13528657111 (wechat same number)
Wang Lin 15118335099 (wechat same number)
Q Q: 806124705
Add: No.454 Taian Road, Chang 'an Town, Dongguan City, Guangdong Province
HastelloyC-276
Overview of Hastelloy C-276 Features and Application Fields:
This alloy has excellent corrosion resistance to most corrosive media in both oxidized and reduced states. Excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion cracking. Alloys are suitable for various chemical process industries containing oxidizing and reducing media. The higher content of molybdenum and chromium makes the alloy resistant to chloride ion corrosion, and tungsten further enhances its corrosion resistance. Hastelloy C-276 is one of the few materials that can withstand the corrosion of humid chlorine gas, hypochlorite, and chlorine dioxide solutions. This alloy has significant corrosion resistance to high concentration chloride solutions, such as ferric chloride and copper chloride.
Hastelloy C-276 Similar grades:
W. Nr.2.4819 NiMo16Cr15W (Germany) NC17D (France)
Hastelloy C-276 Chemical composition:
|
alloy |
% |
nickel |
chromium |
iron |
molybdenum |
tungsten |
cobalt |
carbon |
manganese |
silicon |
sulfur |
phosphorus |
vanadium |
titanium |
|
Hastelloy C-276 |
small |
margin |
15.0 |
4.0 |
15.0 |
3.0 |
|
|
|
|
|
|
0.1 |
|
|
big |
16.5 |
7.0 |
17.0 |
4.5 |
2.5 |
0.01 |
1.0 |
0.08 |
0.001 |
0.015 |
0.3 |
|
Hastelloy C-276physical property ：
|
density |
melting point |
Thermal conductivity |
Specific heat capacity |
Elastic modulus |
shear modulus |
resistivity |
Poisson's ratio |
linear expansion coefficient |
|
8.9 |
1325 |
10.2(100℃) |
407 |
208 |
79 |
1.25 |
|
11.7(20~100℃) |
Hastelloy C-276mechanical property：(20℃ Detecting the minimum value of mechanical performance)
|
Heat treatment method |
tensile strengthσb/MPa |
yield strengthσp0.2/MPa |
Elongation rateσ5 /% |
hbw HBS |
|
solution treatment |
758 |
363 |
62 |
|
Hastelloy C-276Production execution standards：
|
standard |
bar |
forging |
Plate (strip) material |
wire |
Pipe |
|
astm |
ASTM B574 |
ASTM B564 |
ASTM B575 |
|
ASTM B622 |
|
Technical Specification for Aerospace Materials in the United States |
|
|
|
|
|
|
American Society of Mechanical Engineers |
ASME SB574 |
ASME SB564 |
ASME SB575 |
|
ASTM SB622 |
Hastelloy C-276 Metallographic structure：
The alloy has a face centered cubic lattice structure。
Hastelloy C-276Process performance and requirements：
1. The lower the sulfur content in the hot processing fuel, the better. The sulfur content in natural gas should be less than 0.1%, and the sulfur content in heavy oil should be less than 0.5%.
2. The hot working temperature range of the alloy is 1200 ℃ to 950 ℃, and the cooling method is water cooling or rapid air cooling.
3. Suitable for welding using any traditional welding process, such as tungsten inert gas welding, plasma arc welding, manual sub arc welding, metal inert gas welding, and melting electrode inert gas welding.
Hastelloy C-276physical property：
|
density |
melting point |
Thermal conductivity |
Specific heat capacity |
Elastic modulus |
shear modulus |
resistivity |
Poisson's ratio |
linear expansion coefficient |
|
8.9 |
1325 |
10.2(100℃) |
407 |
208 |
79 |
1.25 |
|
11.7(20~100℃) |
Hastelloy C-276mechanical property：(at20℃ Detecting the minimum value of mechanical performance)
|
Heat treatment method |
tensile strengthσb/MPa |
yield strengthσp0.2/MPa |
Elongation rateσ5 /% |
hbw HBS |
|
solution treatment |
758 |
363 |
62 |
|
Hastelloy C-276Production execution standards：
|
standard |
bar |
forging |
Plate (strip) material |
wire |
Pipe |
|
astm |
ASTM B574 |
ASTM B564 |
ASTM B575 |
|
ASTM B622 |
|
Technical Specification for Aerospace Materials in the United States |
|
|
|
|
|
|
American Society of Mechanical Engineers |
ASME SB574 |
ASME SB564 |
ASME SB575 |
|
ASTM SB622 |
Hastelloy C-276 metallographic structure:
The alloy has a face centered cubic lattice structure.
Hastelloy C-276 Process Performance and Requirements:
1. The lower the sulfur content in the hot processing fuel, the better. The sulfur content in natural gas should be less than 0.1%, and the sulfur content in heavy oil should be less than 0.5%.
2. The hot working temperature range of the alloy is 1200 ℃ to 950 ℃, and the cooling method is water cooling or rapid air cooling.
3. Suitable for welding using any traditional welding process, such as tungsten inert gas welding, plasma arc welding, manual sub arc welding, metal inert gas welding, and melting electrode inert gas welding.
